Passion and Innovation to achieve the excellence of bolting works and make the control more accurate, easier yet cost-effective Makes pneumatic oil pulse torque tool can be controlled within ± 5%～±10%. Makes impact tool can be controlled within ±10%～± 15% accuracy. Makes cordless oil pulse torque tool can be controlled within ±10%～± 15% Makes cordless […]
Dear Valued Customers and Partners, We hope this message finds you well during these uncertain times. We wanted to take a moment to reassure you that our company and staff are safe and accounted for following the recent earthquake. We have conducted thorough checks to ensure the well-being of our team, and we […]
Factors in consideration The target torque vs the capacity of the impact wrench or pulse wrench The joint condition The type of torque tool to be usedTorque tool specification vs target torque tool and joint hardness How many seconds to finish the job Bolting sequence control and stages for tightening the bolt Traceability for […]
STA Swing Type Torque & Angle Transducer Torque wrench transducer adapter that evolves your interchangeable head torque wrench #torquewrench #torquesensor #torquetools #transducers
ZIPPTORK Bolting Technology Bolt Load Control of Threaded Fasteners In order to meet the industrial development trend of Industry 4.0, our company has introduced a full range of patented products related to bolt tightening technology, which provides a cost-effective solution for the industry. Bolting of threaded fasteners is affected by many factors, such as the […]
STA (RF version)-Residual Torque Verification What are required System Architecture Procedures Insert Dongle into NB or Tablet. Open the TMS software. Set the Dongle port. Enter the STA mode and then press the “Setup” button to enter the “Setup” page. Select the combination code. Follow the combination shown in the tool combination code to complete […]
STA (RF version)-Torque & Angle Control What are required System Architecture Procedures Insert Dongle into Notebook or Tablet. Open the TMS software. Set Dongle port. Enter the STA mode and then press the “Setup” button to enter the “Setup” page. Select the combination code. Please follow the combination shown in the tool combination code to […]
STA (RF version)-Torque Control What are required System Architecture Procedures Insert Dongle into Notebook or Tablet. Open the TMS software. Set Dongle port. Enter the STA mode and then press the “Setup” button to enter the “Setup” page. Select the combination code. Please follow the combination shown in the tool combination code to complete the […]
STA (RF version)-Torque & Angle Calibration What are required System Architecture Procedures Assemble the HEAD with STA & Interchangeable Head Torque Wrench. Insert the two Dongles into the NB separately. Open TMS APP software. Set up the TTA Dongle & STA Dongle ports respectively. Complete the pairing of TTA and STA respectively, after setting, turn […]
STA Wireless Swing Type Torque Transducer and universal heads
- 1
- 2